Thermoelectric cooling

Thermoelectric Cooling Heating Plate for Thermal Testing
Specification Rev 02


1. General description
Thermoelectric Cooling/Heating Plate is designed for thermal testing of the electronic components and assembles at wide temperature range from -45 C to 115 C and consists of the following main components:

  • Bench top unit with cold/hot plate and control panel with temperature display allowing set of controlled temperature
  • Liquid chiller with power supply/control box
  • Flexible hose connecting between chiller and bench top unit


2. Mechanical performance

  • Overall dimensions of the bench top unit: 360 x 375 x 80 mm
  • Overall dimensions of the chiller: 325 (W) x 550 (D) x 700 (H) mm (including power supply/control box)
  • Hose dimensions: diameter- 60 mm, length – 2 m (optionally 3m)
  • Cold/hot plate dimensions: 200 x 250 mm

3. Electrical performance

  • Input voltage: 230 VAC, 50 Hz
  • Input current: 7A

4. Thermal performance

  • Cold/hot plate temperature range: -45 C … 115 C
  • Maximum heat dissipation of the component
    to be tested: 40 Watts

  • Cooling time from 25 C to -45 C : 20 min
    (at chiller’s liquid temperature range: -10 C … -15 C without components power dissipations)
  • Heating time from 25 C to 115 C: 20 min
    (at chiller’s liquid temperature range: -10 C … -15 C without components power dissipations)

5. Communication

  • Communication with PC: RS485
  • Connector type: USB
  • Length of the communication cable: 2 m